Home > iphone > Iphone Usb Charger Diy

Iphone Usb Charger Diy

October 13th, 2008 admin Leave a comment Go to comments

iphone usb charger diy

DIY a Solar Charger for Yourself

The ability to use the sun to provide a solar charger to power everyday electronics like cell phones is available. This project requires some technical ability but can provide you with a solar powered unit that can be used to charge your cell phone.

This project is an adaptation of a kit used to charge iPods and other USB connector devices. You will need to obtain a Minty Boost battery powered charger in order to make the changes necessary to convert it into a solar charger. Once you have obtained this unit, follow the steps below.

This charger works with cell phones that use a USB connector port for charging. Compatible devices that work with this project, includes Nokia, iPhone, and Blackberry.

Materials Needed

1 Minty Boost Battery-Powered USB Charger
2 AA or 2 Rechargeable 3.7v 2000mAh Lithium Polymer Batteries
Lithium Polymer Charger
JST Connector
Small Solar Cell
2” by 3” Adhesive Back Velcro Strip
Clear Packing Tape

Step 1 – Connect the Solar Cell
Replace the JST connector in the Minty Boost charger with a replacement JST connector. The connector should be marked “5v” on the charging circuit. After this has been completed, affix the solar cell with the JST connector to the Altoids tin, using some of the adhesive Velcro strip. Remove the adhesive backing and affix to the solar cell and the back of the Altoids tin.

If you are truly technically savvy, you may choose to build your own Minty Boost battery-powered USB charger. You may however find it as easy and less labor intensive to order a completed unit.
 
Step 2 – Charge the Unit
Once you have secured the solar cell to the Minty Boost charger, set it in the sun to charge. The unit is ready to use when you see the LED indicator light turn red. This indicates that the unit is ready to charge your cell phone.

Please note: You may choose to replace the AA batteries with rechargeable 3.7v 2000mAh lithium batteries. If that is the case, it would be better for you to build the Minty Boost unit from scratch. The advantage here is that you won’t have to constantly change out disposable batteries as there will be a conduit for you to plug the storage unit into a lithium polymer batter charger to charge the batteries. Use clear packing tape to wrap the lithium batteries. This will help to keep them protected.

About the Author

SRESKY is a solar charger manufacturer from China. provides solar charger, solar battery charger, solar powered battery charger and more.

DIY iphone ipod touch external battery charger


Apple iPad Dock Connector to VGA Adapter (MC552ZM/A)


Apple iPad Dock Connector to VGA Adapter (MC552ZM/A)


$17.59


Use the iPad Dock Connector to VGA Adapter to connect an iPad to your television, projector, or VGA display. Then see your videos and slideshows on the big screen. The iPad Dock Connector to VGA Adapter connects to your iPad or iPad Dock via the dock connector and to your projector or display using the VGA adapter….

Plugable 5 Meter (16 Foot) USB 2.0 Active Extension Cable Type A Male to A Female


Plugable 5 Meter (16 Foot) USB 2.0 Active Extension Cable Type A Male to A Female


$9.95


Connect USB printers, displays, adapters, keyboards, etc. from across the room with this 5 meter / 16 foot USB 2.0 active extension cable. This cable uses the same electronics and gauge of cable as our popular 10 meter version, but stays within USB 2.0’s maximum standard length of 5 meters. CompatibilityNo drivers required on any OS (functions as a one-port USB hub using built-in drivers). Works a…

iPhone 4, iPad, iPad 2, iPod Touch (4th Generation) to HDMI Adapter and 6 feet USB Data Sync & Charger Cable 2-Piece Kit


iPhone 4, iPad, iPad 2, iPod Touch (4th Generation) to HDMI Adapter and 6 feet USB Data Sync & Charger Cable 2-Piece Kit


$29.98


Please make sure you purchase this 2-piece bundle ONLY from Cable Matters as all of good reviews are based on the genuine product made and sold by Cable Matters.  iPhone 4, iPad, iPad 2, iPod Touch (4th Generation) to HDMI Adapter – Connects iPhone 4, iPad, iPad 2, iPod Touch (4th generation only) to your HDTV via HDMI – Supports the following apps: Movies (iTunes, Netflix), Videos, Photos…

Goal Zero 19006 Guide 10 Adventure Kit with 4 Goal Zero AA Batteries


Goal Zero 19006 Guide 10 Adventure Kit with 4 Goal Zero AA Batteries


$89.75


Charges handheld devices such as cellular phones music players gps units & digital cameras from solar power or from aa/aaa batteries 2 in 1 charging system that powers up aa & aaa rechargeable batteries & harnesses that power via the usb port to charge other devices extremely compact & portable weight: 1 lb includes batteries…

NEEWER® Portable AA Battery Powered Emergency Charger with Flashlight - Black - For Anything Powered Via USB


NEEWER® Portable AA Battery Powered Emergency Charger with Flashlight – Black – For Anything Powered Via USB


$0.01



GROUND LOOP ISOLATOR FOR 3.5 MM APPLICATIONS


GROUND LOOP ISOLATOR FOR 3.5 MM APPLICATIONS


$9.91


Close to perfect response of +/- .03 db from 2 to 20,000Hz Utilizes proprietary audio transformers for a 1.3 dB …

goPoint Technology GL1 OBD-II Accessory for iPhone/iPod/iPad


goPoint Technology GL1 OBD-II Accessory for iPhone/iPod/iPad


$86.15


**WINNER** Popular Mechanics Breakthrough Product Award 2010 — Our GL1 protocol converter, an Apple “Works With iPhone” product, will directly connect your vehicle’s engine On Board Diagnostics (OBD) data to your iPhone, iPad, or iPod touch. Use your iPhone/iPod touch to read/reset diagnostic codes! LOG your vehicle’s engine performance! And much, much MORE!

More: the GL1 will charge your iPh…


DIY Solar Powered Portable: iPhone Charger


DIY Solar Powered Portable: iPhone Charger


$0.99


A novice project that will give you an idea on how to create a basic/absolute solar powered USB charger for any portable device….


  1. No comments yet.
  1. No trackbacks yet.